Air Abrasion Could be a More Pleasant Alternative to the Dental Drill
Air Abrasion…While it may not be one of your favourite features in the dental office, the dental drill is nevertheless necessary for treating problem teeth. It’s used primarily for removing decayed or damaged structure and preparing a tooth for fillings or other restorations.
Dental drills have been used for decades and are quite effective — but they have their drawbacks. Their rotating burrs often remove portions of healthy tooth structure along with decayed material. Friction from the drill action can cause discomfort, so local anaesthesia is usually needed. Drills can also emit a high-pitched machine noise that’s unsettling to many patients.
There’s a growing alternative to the drill, known as air abrasion. Although the technology has been around since the 1950s, the development of new suction pumps that capture the resulting dust from its use has made it more palatable as an option to the traditional drill.
Also known as particle air abrasion, the technique uses a pressurized stream of fine particles (usually aluminum oxide, an abrasive powder) directed at teeth to wear away (abrade) the tooth’s structural surface. We can be quite precise in the amount of surface material removed, so it’s useful for diminishing stains or roughing the surface for bonding materials like composite resin. We’re also able to remove decayed material with very little impact on surrounding healthy structure, and you may not need anesthesia during the procedure.
While this quiet alternative to the noisier drill is quite versatile, it does have its limitations. It’s not that efficient for preparing larger cavities for restoration or for removing older amalgam fillings. The teeth to be treated must be carefully isolated to prevent the fine particle dust produced from being swallowed by the patient or spread into the air. High-volume suction equipment is a must or the procedure will create a “sandstorm” of particles in the room.
Still, for situations suited to it and with proper isolation measures, air abrasion can be effective and comfortable. If the technology continues to improve, the dental drill may soon become a relic of the past.
If you would like more information on procedures using air abrasion, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Air Abrasion Technology.”
DISCLAIMER OF MOORESVILLE DENTAL GROUP
Mooresville Dental Group expressly disclaims all warranties and responsibilities of any kind, whether express or implied, for the accuracy or reliability of the content of any information contained in this Web Site, and for the suitability, results, effectiveness or fitness for any particular purpose of the services, procedures, advice or treatments referred to herein, such content and suitability, etc., being the sole responsibility of parties other than Jason R. Robinson, DDS and OFFICITE, and the reliance upon or use of same by you is at your own independent discretion and risk. Contact us for complete details.
We are Open for Regular Business
Our office is operating at full capacity to help our patients get and keep their oral health in great shape. Click on the link below to see what’s new and our updated protocols to keep you healthy and safe. COVID 19 Policy Details
Air Abrasion…While it may not be one of your favourite features in the dental office, the dental drill is nevertheless necessary for treating problem teeth. It’s used primarily for removing decayed or damaged structure and preparing a tooth for fillings or other restorations.
Dental drills have been used for decades and are quite effective — but they have their drawbacks. Their rotating burrs often remove portions of healthy tooth structure along with decayed material. Friction from the drill action can cause discomfort, so local anaesthesia is usually needed. Drills can also emit a high-pitched machine noise that’s unsettling to many patients.
There’s a growing alternative to the drill, known as air abrasion. Although the technology has been around since the 1950s, the development of new suction pumps that capture the resulting dust from its use has made it more palatable as an option to the traditional drill.
Also known as particle air abrasion, the technique uses a pressurized stream of fine particles (usually aluminum oxide, an abrasive powder) directed at teeth to wear away (abrade) the tooth’s structural surface. We can be quite precise in the amount of surface material removed, so it’s useful for diminishing stains or roughing the surface for bonding materials like composite resin. We’re also able to remove decayed material with very little impact on surrounding healthy structure, and you may not need anesthesia during the procedure.
While this quiet alternative to the noisier drill is quite versatile, it does have its limitations. It’s not that efficient for preparing larger cavities for restoration or for removing older amalgam fillings. The teeth to be treated must be carefully isolated to prevent the fine particle dust produced from being swallowed by the patient or spread into the air. High-volume suction equipment is a must or the procedure will create a “sandstorm” of particles in the room.
Still, for situations suited to it and with proper isolation measures, air abrasion can be effective and comfortable. If the technology continues to improve, the dental drill may soon become a relic of the past.
If you would like more information on procedures using air abrasion, please contact us or schedule an appointment for a consultation. You can also learn more about this topic by reading the Dear Doctor magazine article “Air Abrasion Technology.”